#Steel super eraser full#

Here are my favorite fret polishing products, all of which will leave no little ferric stragglers! This is going to seem like an overt advertisement by Stew-Mack, but I assure you, I have no connection with them apart from using a ton of their products. So, if steel wool ain't the proper tool for this job, what is? Thankfully Stewart-McDonald has thought this question through many years ago and provided us with downright elegant solutions.

#Steel super eraser full#

Over time, you're shop will become downright infested by steel slivers, and they WILL find their way to pickups and speakers, and they can wound or kill a speaker as easily as a pickup! A voice-coil gap full of steel slivers leads to a gnarly sounding speaker that will eventually fail. Why? Because over time you are creating literally millions of steel bits that float EVERYWHERE in your shop no matter how hard you try, you will never clean all those tiny steel slivers up. If, like me, you do MANY guitars on your bench, and also have MANY magnetic pickups, speakers, and tools in your shop, you are still inviting big-time trouble. Now if you just flat NEED to use steel wool, then I guess this is the best course of action, but here's why I don't like that method. So, when working on electric guitars, it became standard practice to tightly tape-off the pickups, electronics, and any body cavities before going after it with the steel wool, and effect a thorough clean-up of steel shards afterwards. So, the old standard of days gone by was, in fact to use extra-fine steel wool to polish up your frets messy, but that was fine before the days of those new-fangled ELECTRIC guitars. Worst case: dead pickup! And, even if you don't totally kill your pickup, the addition of thousands of tiny bits of steel into a magnetic pickup will seriously effect the tone of the pickup.

What's next? Best case scenario is you wind up wasting a lot of time with sticky tape, tooth picks, and tweezers ridding the pickup of all the little steel intruders. It happened again last week, I was sent a pickup to fix, and when I took a look at it the problem was clear, STEEL WOOL! You see, when you use steel wool to polish the frets on your guitar, you end up with thousands of tiny steel bits EVERYWHERE and those bits will be strongly attracted to your guitar's magnetic pickups. It is nice to find a product that is not made in china.The Best Way To Clean and Polish Your Frets (Don't use Steel Wool!) They are easy to use, with little effort and they last for years. Honestly, You have to see it to believe it! Liquid metal cleaners wouldn't touch the spots, but the super Eraser got them off. That was important, my eraser turned a virtually worthless blade into something not only salvageable but also marketable. They were not perfect but they came out nice and ready to sell. I used the Super Rust Eraser and every single knife showed marked improvement. I came across some old pocket knives a few weeks ago that had some serious rust spots. The Super Eraser has an abrasive compound mixed into the rubber of the eraser. I could not live without it.Įvery knife collector should know about the Super Eraser. They are ideal for erasing rust, tarnish and other surface blemishes on metal, and produces a fine, brushed satin finish.

The Super Knife Eraser is the well kept secret. But my Super Knife eraser is another story. I have not found one that does the job I need it to do. There are all sorts of polishes, goops and products that make claims to remove rust and tarnish.

I use a Super Knife eraser to clean my blades. You never know, blades do rust and get marked up. I come across blades that have marks, like rust, tarnish and other markings. I sell high end knives and I sell low end knives. Have you ever wondered why knife dealers knives always look so good? Keith Little Badger Hand Forged Historical Blades.